[Equest-users] Interpreting Gas Consumption??

[Vikram Sami]

That should be close enough - its 1.0002 (I think). 

 

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jim
McCarthy
Sent: Wednesday, July 29, 2009 4:58 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Interpreting Gas Consumption??

 

Hi,

 

eQUEST newbie here.....when I run the simulation the gas load comes out
typically as  (Btu x 000,000.

My challenge is I need the results in therms....am I simply moving the
decimal point as in 100,000btu's equals 1 therm???

Help 

 

JMAC

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090730/b805578f/attachment.htm>