[Equest-users] Cloning / copying components among floors

[Vikram Sami]

Lars,

If the floors are similar, you could try using a floor multiplier.

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Lars
Fetzek
Sent: Monday, July 27, 2009 11:23 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Cloning / copying components among floors

 

Everyone,

 

    Is there a way to copy a bunch of components, such as internal walls
and light fixtures, from one floor to another without having to re-enter
all defining data for the duplicate set as would be necessary for
creating the components from scratch?  If I could first do this, then
make the few alterations to the components distinguishing the two
floors, I could save alot of busy work.

    As usual, thanks in advance from this eQuest beginner.

 

Lars Fetzek, EI

Phoenix Engineering Group

Tampa, Florida

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090728/162f0e9d/attachment.htm>