[Equest-users] Receptacle loads

[Grove, Rebecca]

In a project we are working on, the design receptacle load is 0.75 W/sf,
not the default value of 1.7 W/sf. I was wondering if there was any way
to change this. The DOE-2 help file says that "Receptacle loads are
automatically assigned by the rules processor regardless of values input
by the user in the wizard, detailed interface or BDL input file. All
user input values are ignored by the rules processor." Is this true? Is
there any way around this?

Thanks!


Rebecca Grove, LEED AP
Senior Engineer
Thornton Tomasetti
One Audubon Street, Fourth Floor
New Haven, CT  06511
T 203.672.1390  F 203.672.1391  
D 203.672.1436  
RGrove at ThorntonTomasetti.com
www.ThorntonTomasetti.com



<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

The information in this email and any attachments may contain

confidential information that is intended solely for the

attention and use of the named addressee(s). This message or

any part thereof must not be disclosed, copied, distributed

or retained by any person without authorization from the

addressee. If you are not the intended addressee, please

notify the sender immediately, and delete this message.

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090713/6b014c88/attachment.htm>