[Equest-users] Can eQuest be used to read EnergyPro input files?

[B. Fountain]

EnergyPro is in DOE 2.1e.  eQUEST is DOE2.2

On the eQUEST doe2.com website there is a procedure for converting 2.1e
files to 2.2 (attached too) but it is definitely non-trivial.  We've done
it once but the schedules all need to be changed, the loops are all new to
2.2 so much of the plant level info needs to be re-entered.

Good luck.

Brian

> I'm told the two programs both use the DOE2 engine, does anyone have
> experience eQuest to read EnergyPro input files?
>
> Thanks,
>
>
>
>
>
> Jim Crockett, P.E.
>
>
>
> Senior Project Engineer
>
> Energy & Carbon Management
>
> Nexant, Inc.
>
> 4021 S. 700 E., Suite 250
>
> Salt Lake City, Utah 84107
>
>
>
> (801) 639-5603 - phone
>
> (801) 266-4786 - fax
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cnvrt21e.pdf
Type: application/pdf
Size: 75008 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090828/3b2cc4d3/attachment.pdf>