[Equest-users] loop flow

[Verena Kindl]

Hi all,

 

As I know the capacity of my chiller, condenser and boiler I try to
allocate the value in the detailed mode. This is working fine but in the
PV-A report I can see that for example the chiller has the allocated
capacity but the flow of the chilled water loop and the flow through the
chiller is different. How can this happen ? I mean I have a single
system pump it is one loop the chiller is directly connected to the
chilled water loop ( mass conservation ? ). When I want to allocate a
capacity to my condenser I always get the error message 

 

***ERROR****************************************************************
*******

             Pump: CW Loop Pump                     has zero design
flow.  If attached to

             a DHW loop, make sure the recirculation flow is 

             nonzero.


But I connected the loop to the chiller and I put a temperature
difference, there should be a flow ? I attach also a screen shot from my
water side set up I hope someone can help me.

Thanks a lot.

Verena

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090827/fc7f23f5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 80999 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090827/fc7f23f5/attachment.jpeg>