[Equest-users] GSHP-Extreme Temperatures

[John Aulbach]

Are you putting in the right number of wells??

--- On Mon, 8/10/09, Zareh, Hassan <Hassan.Zareh at stantec.com> wrote:

> From: Zareh, Hassan <Hassan.Zareh at stantec.com>
> Subject: [Equest-users] GSHP-Extreme Temperatures
> To: equest-users at lists.onebuilding.org
> Date: Monday, August 10, 2009, 11:44 AM
> 
> Stantec
>  
> 
> #yiv1026167879
> {MARGIN-TOP:25px;FONT-SIZE:10pt;MARGIN-LEFT:25px;COLOR:#000000;FONT-FAMILY:Arial;}
> 
> 
>  
>  
> Hi All,
> I'm modeling a
> health care facility and the 
> HVAC system is GSHP. Each time that I run the model, it
> gives me warning about 
> the following errors: 
> Ground-loop HX: GLHX (VertWell-CM) 
> is undersized for the load and is producing an
> extreme
> temperature of -388F. Mon/Day/Hr: 1/ 1/ 1
>  
> OR
> Ground-loop HX: GLHX (VertWell-CM) 
> is undersized for the load and is producing an
> extreme
> temperature of 351F. Mon/Day/Hr: 1/ 1/
> 1
>  
> Anybody has any ideas 
> what's the reason for these extreme
> temperatures?
> Thanks in 
> advance.
>  
> Hassan Zareh, 
> M.Eng., P.Eng., LEED® AP
> Project Engineer
> Stantec Consulting 
> Ltd.
> 100 - 401 Wellington Street West
> Toronto ON M5V 
> 1E7
> Ph: (416) 598-7642
> Fx: (416) 596-6680
> hzareh at stantec.com 
> 
> stantec.com 
> 
>  
> The content of this 
> email is the confidential property of Stantec and should
> not be copied, 
> modified, retransmitted, or used for any purpose except
> with Stantec's written 
> authorization. If you are not the intended recipient,
> please delete all copies 
> and notify us immediately.
>  
> ü
> Please 
> consider the environment before printing this
> email. 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>