[Equest-users] Heat recovery from the condenser to heating coil and heat recovery on air evacuation using a DX system with water-glycol

[Gal, Amandine]

Dear Equest users, 
 
I just arrived to Canada and I have to make a model of a building in Montréal for LEED. I would like to know if Equest has the features to model the HVAC systems of this building.
 
To reduce the heating consumption, we would like to take the heat from the condensers of the different chillers to use it to heat the heating coils of the ventilation system. Moreover, we would like to recover the heat for the air evacuation with direct expansion system to heat the condenser.
 
Do you think that is possible to model it with EQuest? and if yes, ( I hope because if not, I have to model it with EnergyPlus but it will be quite more complicated), how to do it?
 
Thank you in advance.
 
Regards
 

Amandine Gal 

Spécialiste en ingénierie

Division Transport, Infrastructures et Bâtiment

 

SNC-Lavalin inc.

8000 boul. Décarie, 3e étage 

Montréal (Québec)

Canada  H4P 2S4

Téléphone:  514-735-5651 poste 2346

Télécopieur:  514-737-7988

Courriel:  amandine.gal at snclavalin.com <blocked::mailto:amandine.gal at snclavalin.com> 

www.snclavalin.com <blocked::http://www.snclavalin.com/> 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090805/92a2741e/attachment.htm>