[Equest-users] Converting from IP to metric

[John Aulbach]

Celia:
 
I believe the eQuest engine, DOE-2.2 can operate in Metric units. However, at this time, I believe the eQuest interface does not allow such a switch.
 
So develop your model totally in eQuest, then go to the DOE-2.2 enginer and run a batch run with the units in metric.
 
John Aulbach


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090430/1028e47c/attachment.htm>