[Equest-users] Receptacle Energy

[James Hess]

Good advice, and I agree based on my own measurements of printers, computers, refrigerators, consumer electronics, etc.

The hard part is finding good data. I've had some luck (& fun) with a simple "Kill-A-Watt" plug power meter (available from Amazon for about $25). Over time I take measurements and get a good feel for what things use. For example, I recently measured a typical large office printer for about 600 hours and found the average watts to be about 75 though the nameplate was about 1100. That was interesting because I had no idea how much those used.

I would expect a similiar relationship for the lab equipment in that the average usage will be on the order of between 5 to 30% of nameplate power.

You can also check the EnergyStar or Labs21 websites to see if they have any useful data.

If you are going to measure some panels to get better data, an excellent data logging power meter to do that is the ElitePro by Dent Instruments (a favorite of energy engineers).

Hope this helps!

Regards,

James Hess

On Apr 21, 2009, at 10:33 PM, "Karen Walkerman" <kwalkerman at gmail.com<mailto:kwalkerman at gmail.com>> wrote:

sounds like you're modeling the peak energy use of the equipment.  If so, you can develop a schedule, which has the equipment on at part load all days except cooling design days.  You'll need to do some research to figure out what the appropriate part load is.  If the building is complete, or if there is a similar building currently in operation, I recommend obtaining electricity use data, and monitoring a few sub-panels for a period of a few days.  In many labs, the high-energy equipment is not used at full load most of the time.

--
Karen

On Tue, Apr 21, 2009 at 6:24 PM, steven rutter <<mailto:stevenrutterjr at gmail.com>stevenrutterjr at gmail.com<mailto:stevenrutterjr at gmail.com>> wrote:
I am trying to model a 2-story college going for LEED.  The building contains several differernt lab rooms which includes a lof of equipment (Approximately 26W/ft^2 for half of the building).  After running the simulation, the preliminary report states that the annual TDV Energy Use Summary for the entire building is 847.95 TDV-kBtu/sqft-yr with 684.71 towards the receptacle energy.  Trying to get the minimum 14% energy cost savings is almost impossible with this receptacle energy. What options do I have to reduce the Receptacle Energy in order to meet criteria for LEED points?  Is there somewhere I can input this heat load so it does not have such a great impact on the energy use summary report and still have an accurate model of the building?
-Steven Rutter

_______________________________________________
Equest-users mailing list
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to <mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to <mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090422/0e529a4a/attachment.htm>