[Equest-users] VVT, heating only

[Howe, Timothy]

1.	
	Put the cooling on a separate electric meter so that it does not report it, or set the cooling thermostat set point to the maximum allowable value or a combination of these.
2.	
	VVT is an available system type.. not sure if you were asking because of the no cooling.
3.	
	Utility bill matching is very difficult, you will need to know more specifics about the schedules of operations, equipment efficiencies, lighting efficiencies... so on.  If it is close +-10% I would not worry about it, otherwise you will need to massage the model to fit existing conditions.  

 
Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

stantec.com <http://www.stantec.com/>  
 
The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.
 
ü Please consider the environment before printing this email.
 

________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kalianda, Angelina
Sent: Wednesday, April 15, 2009 3:07 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] VVT, heating only



Hi all,

 

I have a VVT type system but with no cooling, heating only.  What kind of system type I can model that?  When I chose the HW furnace with zone ventilation, the heating consumption was smaller than the utility bill.  If I chose other type of system (package VVT, MZ, etc.), it's assuming it has some kind of cooling.

 

Thanks in advance for your help.

 

Angelina Kalianda, PE, CEM

Development Engineer

D 858-947-7193

C 760-585-8624

 

AECOM Energy

440 Stevens Avenue

Suite 250

Solana Beach, CA 92075

T 858-947-7144   F 858-947-7145

www.aecom.com <http://www.aecom.com/> 

 

My e-mail has changed to angelina.kalianda at aecom.com <mailto:angelina.kalianda at aecom.com> .  Please update your address books accordingly.

 

* Please consider the environment before printing

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090415/be54cd59/attachment.htm>