[Equest-users] Equest & ASHRAE 90.1

[Jeremy Poling]

Scott,

 

Usually we've found that following Appendix G requires a separate model
to be setup for the baseline.  This is not as much work as it sounds,
though, as you are able to copy your design model and make the changes
John describes below.  Also, where Appendix G requires you to model the
building at 4 rotations, you are able to do this parametrically so you
don't need a separate model for each rotation.

 

Jeremy R. Poling, LEED AP
Senior Sustainability Analyst
Strategic Services

Site Solutions | Operations | Sustainability

EPSTEIN



________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of John
Aulbach
Sent: Monday, April 06, 2009 11:38 AM
To: equest-users at lists.onebuilding.org; ScottPolson
Subject: Re: [Equest-users] Equest & ASHRAE 90.1

 

Scoot:

 

You need to put all the Appendix G requires into the model by hand.
Incluidng window, wall, and roof U-values (Simplified)

 

John Aulbach, PE

--- On Mon, 4/6/09, Polson, Scott <SPolson at McCarthy.com> wrote:

	
	From: Polson, Scott <SPolson at McCarthy.com>
	Subject: [Equest-users] Equest & ASHRAE 90.1
	To: equest-users at lists.onebuilding.org
	Date: Monday, April 6, 2009, 9:24 AM

	Hi Everyone,

	 

	I am new to this forum.  I work for a general contractor and we
have formed a Green Steering committee to help set up basic guidelines
company wide for LEED or "green" projects.  My group's focus is LEED
EAc1.  We have been working with Equest and I have this question:

	 

	How do you incorporate ASHRAE 90.1 requirements into Equest?

	 

	This subject may have been discussed before, but I searched the
archives and could not find anything.  Any help would be greatly
appreciated.

	 

	Thanks,

	 

	Scott Polson, LEED AP

	McCarthy Building Companies, Inc. 

	San Francisco Unified School District

	Phone: (415) 681-1661

Fax: (415) 681-1600

Mobile: (510) 772-8377 

 

Leaving Green Footprints. Think before you print.

 


-----Inline Attachment Follows-----

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
<http://us.mc01g.mail.yahoo.com/mc/compose?to=EQUEST-USERS-UNSUBSCRIBE@O
NEBUILDING.ORG> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090406/3118400e/attachment.htm>