[Equest-users] PTAC with District Chilled Water

[John Aulbach]

John:
 
You need to pick a different system. And you need to copy your run and rename the copy, so all your other input remains the same. You cannot do a Parametric Run to do this.
 
John Aulbach

--- On Mon, 4/6/09, Grando, John <JGrando at cosentini.com> wrote:


From: Grando, John <JGrando at cosentini.com>
Subject: [Equest-users] PTAC with District Chilled Water
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Date: Monday, April 6, 2009, 6:05 AM





Hello,
 
I am modeling a building used chilled water coils for cooling hotel rooms.  The baseline system is PTAC, but I don't know how to get EQUEST to change the cooling coil to chilled water.  Does anyone know how to do this or do you just pick a different system?  Thank you for any help.
 
 
John Grando | Mechanical Engineer
Phone: 212-615-3705 | Fax: 212-615-3700
jgrando at cosentini.com

Cosentini Associates - A Tetra Tech Company
Two Pennsylvania Plaza - Third Floor - New York, NY 10121
www.cosentini.com


 
 
 
NOTICE OF CONFIDENTIALITY This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof. In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system. 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090406/59d14c9b/attachment.htm>