[Equest-users] Free Cooling

[Aulbach, John]

Jonathan:
 
You can use the Parametric Run method, if you place your model in the
Detailed Edit mode. Remember, though, that if you make changes in this
mode, you cannot go back to the Wizard Modes.
 
John R. Aulbach, PE, CEM
Project Manager
Nexant, Inc.
701 West Kimberly Ave., Suite 245
Placentia, CA 92870-6342 USA
Phone: 714-524-4402
Fax: 714-524-4407
email: jaulbach at nexant.com
 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
Jonathan Bowser
Sent: Tuesday, November 18, 2008 11:54 AM
To: 'equest-users at lists.onebuilding.org'
Subject: Re: [Equest-users] Free Cooling



Would the [best] way to determine the impact of free cooling be to run
two simulations (one with and one without an economizer) and compare the
resulting loads?

 

-- Jon

 

 

 

Jonathan Bowser

Senior Software Engineer

Beck Technology 

1807 Ross Avenue, Suite 500

Dallas, TX 75052 

(214) 303-6815 

www.beck-technology.com <http://www.beck-technology.com/> 

 

Innovation in All Dimensions

Please consider the environment before printing this e-mail 

  

This e-mail may be privileged and confidential. If you are not the
intended recipient, please delete from all computers.



________________________________

From: Scott Criswell [mailto:scott.criswell at doe2.com] 
Sent: Tuesday, November 18, 2008 11:58 AM
To: Jonathan Bowser
Subject: Re: [Equest-users] Free Cooling

 

DOE-2 does not report the number of hours using "free cooling" (via an
economizer).


Jonathan Bowser wrote: 

How/Where does eQUEST report the number of hours using "free cooling" as
a result of including an economizer?

 

-- Jon

 

 

Jonathan Bowser

Senior Software Engineer

Beck Technology 

1807 Ross Avenue, Suite 500

Dallas, TX 75052 

(214) 303-6815 

www.beck-technology.com <http://www.beck-technology.com/> 

 

Innovation in All Dimensions

  

Please consider the environment before printing this e-mail 

  

This e-mail may be privileged and confidential. If you are not the
intended recipient, please delete from all computers.





 



________________________________



 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081118/dc4ac8f6/attachment.htm>