[Equest-users] Missing External Walls

[Robby Oylear]

Robert,

 

It looks like you're using a "floor multiplier" in the wizard.  By default
eQUEST uses this floor multiplier and directly multiplies energy use of
the middle floor out to the number of floors you've input.  This way the
program can save time in doing the same calculation over and over for an
identical floor plate.  Your building is likely being modeled correctly,
but if you would like the 3D model to show all of the floors you'll need
to uncheck the box in the wizard that says "Use Floor Multipliers".

 

Robby Oylear, LEEDR AP

Mechanical Engineer

direct: 206.788.4571

cell: 206.354.2721

www. <http://www.rushingco.com/> rushingco.com

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Chad
Malone
Sent: Friday, November 14, 2008 8:12 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Missing External Walls

 

Here is an example of what is happening with my projects, equest doesn't
show
all my external wall area. Can anyone help me with this? 

-- 
Robert C. Malone 
CEO
MALONE Enterprises, Inc. 
Architectural and Engineering Design Services 
404-704-5921 (tel)
770-476-8074 (fax)
malone.inc at gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081114/adc494f1/attachment.htm>