[Equest-users] Hello Everyone...I have a question
Montague, Lilah
Lilah.Montague at stantec.com
Thu Nov 13 13:39:21 PST 2008
Hi Chad,
When you are in Detailed Design wizard mode, click on "Edit selected
building shell". On wizard screen 2 of 25, you see the footprint of
your building. You can right-click on the exterior walls to designate
them as exterior, full adiabatic, or partially adiabatic. This may be
your problem, or else I would make sure your footprint polygon is closed
by checking your data points, or re-snapping them.
Good luck!
Lilah Montague
Stantec Consulting
________________________________
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Chad
Malone
Sent: Thursday, November 13, 2008 1:20 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Hello Everyone...I have a question
Good Afternoon Everyone,
I have input all my information into eQuest, and upon completion I ran
the "Simulate Building Performance" in order
to obtain my reports. When I look at the 3D representation of the
building, some of my exterior walls are missing.Can
someone help me with this?
Chad,
--
Robert C. Malone
CEO
MALONE Enterprises, Inc.
Architectural and Engineering Design Services
404-704-5921 (tel)
770-476-8074 (fax)
malone.inc at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081113/3c8632a6/attachment.htm>
More information about the Equest-users
mailing list