[Bldg-sim] [Equest-users] Absorption Chiller Modeling

[Sami, Vikram]

Absorption chillers should be able to run on water cooled condensers. Any chance we can see your inp file?


Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of ????
Sent: Monday, December 10, 2012 5:54 AM
To: Kushagra Juneja; equest-users
Cc: bldg-sim
Subject: Re: [Equest-users] Absorption Chiller Modeling

you must keep it blank ,when the TYPE command is GAS-ABSOR.if want to model absorption chiller (water cooled condenser),you can create a condenser Loop,then modify the CW-LOOP to the Loop which you create just now.


------------------ Original ------------------
From: "Kushagra Juneja";
Date: 2012Äê12ÔÂ10ÈÕ(ÐÇÆÚÒ») ÍíÉÏ7:04
To: "equest-users";
Cc: "bldg-sim";
Subject: [Equest-users] Absorption Chiller Modeling

Hi All,

I am trying to model absorption chiller (water cooled condenser). But it gets stuck up at 18%. I am attaching the error screen shot that pops up while input.

Thanks

Kushagra Juneja, IGBC AP, GRIHA T&E
LEED Green Asso.
Sustainability Engineer (E-II)
Kamal Cogent Energy Pvt. Ltd.
1st Floor, Kamal Ratan Chambers,
Opposite GPO, MI Road, Jaipur ¨C 302001
Ph.: 0141-2373184/85, Ext.: 234
(M). +91-96023-32434
Skype: kushagra.j

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20121210/47cbfc24/attachment.htm>