[BLDG-SIM] Equest Space Error
Andrew Craig
andrew_c at ieice.com
Wed Oct 3 07:31:14 PDT 2007
Keith---
In the detailed edit mode, try clicking on "Check Building Description"
in the Tools pull-down menu. This usually will give you a description
of the BDL error that is in your building and helps troubleshoot it.
Good luck.
Regards,
Andrew Craig, EIT, LEED(r) AP | Mechanical Designer
INTERFACE ENGINEERING
708 SW Third Avenue | Suite 400 | Portland, OR 97204
direct: 503.382.2696
office: 503.382.2266
fax: 503.382.2262
email: Andrew_C at ieice.com
web: www.ieice.com
Consultants of Choice to the Built Environment for over 35 years
Kirkland, WA | Portland, OR | Sacramento, CA | Salem, OR | SanFrancisco,
CA
________________________________
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Keith
Lane
Sent: Wednesday, October 03, 2007 5:09 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Equest Space Error
I initially created my building with the DD Wizard and have gone on to
revise the generated building in the detailed interface. I am getting an
error message that I am unable to solve. It reads under the "Space"
folder "<unknown/invalid component name>" and the next to the error icon
reads "Ceiling Space was referenced on line 28161 but neve..." I am
unable to read the full error message and when I click on the error it
just says "Invalid command and/or reference table indices."
I have a hunch as to the room that the error is referencing because
there was previously another error with the ceiling area which I have
resolved. Any ideas on what could be the problem?
Thanks,
Keith Lane
Junior Mechanical Engineer
Garcia.Galuska.DeSousa
Consulting Engineers Inc.
370 Faunce Corner Road, Dartmouth, MA 02747
p.508.998.5700 f. 508.998.0883
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20071003/2572089f/attachment.htm>
More information about the Bldg-sim
mailing list