[BLDG-SIM] Appendix G Baseline HVAC system and modeling packaged VAV with gas heat
Andrew Craig
andrew_c at ieice.com
Wed Oct 3 13:34:56 PDT 2007
I have two questions that have come up recently...
1. If the a proposed building pursuing LEED is going to use a
Packaged VAV system with a gas furnace in the unit and electric reheat
in the boxes, would the baseline building (according to ASHRAE Appendix
G) fall under the Fossil/Electric Hybrid category or the Electric
category since that is the predominant heating source?
2. Secondly, what is the best way to model this type of system in
eQUEST? I have experimented with first defining a packaged VAV unit in
the wizard with hot water coils as the heating source. Then in the
detailed edit mode, I changed the system "Heat Source" to furnace and
"Zone Heat Source" to electric and deleted the boiler and hot water
loop. When I simulated this model, no natural gas usage showed up in
the BEPS report under Space Heating, however, there was a tiny amount
(~2% of total heating energy) that appeared in the Pumps & Aux category.
Can anyone explain what's happening and/or suggest the best way to model
this kind of system? As a side note, from projects we have monitored
here in Oregon, we would expect to see about 30% of the total heating
energy use go to natural gas for this type of system, primarily from
morning warm-up.
Thanks for your input.
Regards,
Andrew Craig, EIT, LEED(r) AP | Mechanical Designer
INTERFACE ENGINEERING
708 SW Third Avenue | Suite 400 | Portland, OR 97204
direct: 503.382.2696
office: 503.382.2266
fax: 503.382.2262
email: Andrew_C at ieice.com
web: www.ieice.com
Consultants of Choice to the Built Environment for over 35 years
Kirkland, WA | Portland, OR | Sacramento, CA | Salem, OR | SanFrancisco,
CA
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20071003/a254be1d/attachment.htm>
More information about the Bldg-sim
mailing list