[BLDG-SIM] nternal load profiles forresidential buildings in europe
Ramirez, Bob
Bob.Ramirez at itron.com
Wed Dec 10 06:52:51 PST 2003
Mornin' Jim
You should check out Itron/RER eShapes on our website. You can download free end use load shapes for a variety of commercial building prototypes and heating/cooling fuel combinations:
http://www.rer.com/Online/eshapes.htm
The free shapes are available on the regional basis, shown in the map attached to this link:
http://www.rer.com/eshapes/map.htm
As described on the website, we also offer residential and industrial shapes, and we can also do custom applications (i.e. state level, shapes for specific end uses on, etc.).
The only caveat is that eShapes results are presented as kWh (electric) and kBtu (gas), so you would have to convert the kWh if you are interested in overall energy use in kBtu/sf/yr.
If you receive any other useful reference sources that aren't posted back to the group, could you please do so?
Thanks and good luck!
Sincerely,
Bob Ramirez
Bob Ramírez, P.E.
Senior Engineer
Bob.Ramirez at Itron.com
Itron
http://www.RER.com/Consulting
11236 El Camino Real San Diego, CA 92130 USA
VOICE:858.481.0081X427 FAX:858.481.7550
-----Original Message-----
From: Jim Dolan [mailto:jdolan at olace.com]
Sent: Wednesday, December 10, 2003 6:13 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] nternal load profiles forresidential buildings in europe
I'm looking for annual energy consumption costing data for the NorthEast US. (or any other related research) I.E. kBtu/sf/yr for typical buildings such as offices, schools, etc.
Presently our most reliable data consists of our own research on buildings (not formalized), our own modeling efforts, and Energy Star Target Finder.
Thank you
James F. Dolan, P.E. LEED AP
OLA Engineering
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
This message was scanned for viruses!!
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list